Vinage Peterbilt Truck Model 351 Original LEFT FRONT FENDER

Description

This sale is for a used original Peterbilt model 351 left front steel fender.    (Drivers side)      This fender is in very good condition, with no cracks, welds, or repairs, only minor surface rust here and there.   The fender is straight and not warped.   (This can be seen in the photos.)    There are a couple of minor dents, the worst being where the turn signal light was mounted.    The  fender trim around the outside is still in place.    If you measure from the bottom of the front edge of the fender straight across to the bottom of the rear edge it is 58 1/2 inches.   If you measure from the bottom of the front edge to the bottom of the rear edge around the outside of the fender it measures 84 1/2 inches.   The width measurement is 18 inches, except the bottom  of the rear edge has a slight flare.     The winner can pick up the fender near Redding Ca.    If the purchaser wants the fender shipped let me know.   I can deliver free to a local shipper.