Floating LED Pool Pond Fountain 3 spray heads HUNDREDS of LEDs NEW updated

Description

Your choice of 360 or 720 LEDs
note:
the all white lights model are 240(instead of 360) or 480 (instead of 720) LEDs
NEW FOR 2018 - a THIRD fountain head attachment with all fountains EXCEPT for the 480 LED ALL WHITE LED model which has not yet been redesigned.
We have redesigned this item to now include a third fountain attachment! The new fountain head is a 3 tier spray pattern with bigger spray holes, shooting thicker water lines but a little lower then the other 3 tier head. It can reach up to 6 feet high with the included pump.
Color Changing Lights or All White Lights Floating Fountain for Pool or Pond with up to 6 ft tall fountain spray with a pump included (complete setup with all you need)
or
you can buy
without
a pump and
YOU must supply
or use
your own pump
****
****please read info at bottom of this description page if you choose to supply your own pump or tap into your pool or pond's existing water piping/plumbing
PLEASE NOTE: YOU SHOULD NOT USE THIS WHILE YOU OR ANYONE ELSE IS IN THE POOL - WHY TAKE A CHANCE!
6 SWIVEL LED LIGHTS w/60 LED's in each light for a total of 360 LED"S!!!!! (6x60 = 360) (240 LEDs for all white model)
or
12 SWIVEL LED LIGHTS w/60 LED's in each light for a total of 720 LED'S!!!! (6x12 = 720) (480 LEDs for all white model)
COLOR
CHANGING LIGHTS (RGB Red Green Blue) Or All White
Separate Plugs for pump and LEDs so you can run in the daytime with the lights off!
****please note if you wish to use your own pump you will need to be able to throttle it via a valve (i recommend a ball valve) for example:  I use my pool's existing 1HP pump and a long vinyl tube to reach the fountain in the center of the pool from my pump connections, from which I made a tee connection so that water from the pool pump flows to the fountain AND the pool return line - using 2 ball valves I can control the amount of water pressure to the fountain and the return and adjust the fountain water height.. Otherwise putting the fountain directly to the 1 HP is too strong and will blow apart the connections. There are also small pumps that have a built in dial to adjust water flow (harbor freight, walmart, etc) If you are handy you should have no problem doing this.
How does this work?: Simple, the floating ring contains the lights and 1 of the nozzles that you screw on, below the fountain is a small rubber tube that attaches to the nozzle pipe on 1 side and attaches to the pump on the other size. The pump sits directly below the fountain (immersed in water). There are 2 two 33' cords that run in the water from the fountain to your outdoor electric outlet. One plug is for the fountain and the other is for the lights. There is no option to control the light pattern or timing, its either off or on. Same with pump, its off or on. Unless you supply your own timer or have the outlet on a switch!
On Jul-23-14 at 13:53:11 PDT, seller added the following information:
Track Page Views With
Auctiva's FREE Counter